The Copy Size - Oce TDS860 User Manual

[81] Selecting 'Non-standard' scan size

The copy size

The copy width depends on the selected roll and the custom defined scan
width. The copy length depends on the selected cut option.
Copy non-standard size originals
Open the 'Sheet' card of the 'Print' section
1
Use the function key to select 'Media'
2
Select 'Automatic', or select the roll or sheet feeder with the correct width.
3
[82] Selecting roll or sheet feeder in the 'Custom' section
The media can also be selected directly from the 'Custom' section.
Note:
Press the 'Cut length' function key to select the required cut option:
4
Standard, which cuts copies at a standard length.
Synchro, which cuts copies at the end of the image. The system cuts at the
measured length of the original times the zoom factor.
Custom (numeric), which cuts copies on a specified length. You can define
the copy length yourself, using the arrow keys or the numeric keys.
Make other settings as required.
5
Feed the original.
6
Refer to table chapter , 'Standard folding settings' on page 227 for more
information about folding copies of non-standard sized originals.
142 Océ TDS860 User Manual
................