Open the top cover of the Reinforcement Unit and remove all pieces of
4
material inside the unit (see figure 202).
[202] The top cover of the reinforcement unit
Close the top cover and the front door of the Reinforcement Unit.
5
Clear tape jams in the Reinforcement Unit
When a tape jam occurs one of the following messages appears on the display:
'Reinforcing not possible: tape jam' for copy jobs
'Re-feed reinforcement tape' for print jobs.
'Tape jammed in reinforcement unit' for print and copy jobs while the printer
was running.
When a tape jam occurs while the printer runs, the message has a picture of the
printer. The picture shows that the side door of the Reinforcement Unit flashes
(see figure 203).
sa
[203] Tape jam in reinforcement unit
290
Océ TDS860 User Manual