The Copy Size - Oce TDS600 User Manual

[53] Selecting 'Non-standard' scan size

The copy size

The copy width depends on the selected roll or sheet feeder or the custom
defined scan width, whereas the copy length depends on the selected cut
option.
Copy non-standard size originals
Press the 'Media' button in the 'Sheet' card of the 'Print' section to select
1
'Automatic', or to select the roll or sheet feeder with the correct width.
[54] Selecting roll or sheet feeder in the 'Custom' section
The media can also be selected directly from the 'Custom' section.
Note:
When 'Automatic' is selected, the roll or sheet feeder that is used is
Note:
indicated by the ' ' symbol.
Press the 'Cut length' function button to select the required cut option:
2
Standard, which cuts copies at a standard length.
Synchro, which cuts copies at the end of the image. The system cuts at the
measured length of the original times the zoom factor.
Custom (numeric), which cuts copies on a specified length. You can define
the copy length yourself, using the arrow buttons or the numeric buttons.
Make other settings as required.
3
Special copy and scan jobs
................
93