Table of Contents
Advertisement
[74] Selecting 'Non-standard' scan size
The copy size
The copy width depends on the selected roll and the custom defined scan
width. The copy length depends on the selected cut option.
Copy non-standard size originals
Select 'auto roll' on the printer operator panel.
1
The scanner scans wider than the original. No information is lost.
Open the 'Sheet' card in the 'Print' section on the scanner operator panel (see
2
figure 75).
Press the 'Cut length' function key to select the required cut option:
3
Standard, the print length corresponds to a standard format, depending on the
media width. When you use 'Standard cut' information loss can occur.
Synchro, the system cuts at the measured length of the original times the
zoom factor. The minimum length is 279 mm or 11 inch. When you use
'Synchro cut' information loss will not occur.
Custom (numeric), which cuts copies on a specified length. You can define
the copy length yourself, using the arrow keys or the numeric keys.
Feed the original
4
Press 'Start'.
5
[75] Define the cut length
Special copy and scan jobs
137
Hide quick links:
Advertisement
Table of Contents
