Oce TDS860 User Manual page 124

Lock a destination
Select a destination.
1
Open the 'File' menu and select 'Properties'.
2
Check the 'Locked' check box.
3
Click Ok to accept the destination settings.
4
The destination properties are now locked.
This option is only available if you are logged on as a Key operator (see
Note:
'User modes' on page 211).
Unlock a destination
Select a destination.
1
Open the 'File' menu and select 'Properties'.
2
Uncheck the 'Locked' check box.
3
Click OK to accept the destination settings.
4
The destination properties are now unlocked.
This option is only available if you are logged on as a Key operator
Note:
(see 'User modes' on page 211).
Deleting a destination
Select a destination.
1
Open the 'File' menu and select 'Delete' or click the 'Delete' button on the
2
toolbar (see figure 62).
[62] 'Delete' button on the toolbar
The selected destination is deleted.
This option is only available if you are logged on as a Key operator or
Note:
as a Repro operator.
You are not able to delete the last destination.
Note:
124 Océ TDS860 User Manual