Maintenance Of The Reference Roller Of The Océ Tds800 Scanner - Oce TDS860 User Manual

Maintenance of the reference roller of the
Océ TDS800 scanner
If the reference roller is dirty or static, you must clean the reference roller.
Attention:
sensors on the scanner.
How to clean the reference roller
Turn off the scanner.
1
Press the grip at the right hand side, below the original feed table, to open the
2
top cover of the scanner (see figure 140).
Make sure that you hold the top cover of the scanner.
Note:
[140] Open the top cover of the scanner
248 Océ TDS860 User Manual
When you clean the reference roller, be careful not to damage the