Timers - Oce TDS860 User Manual

Timers

The Océ TDS860 is standard equipped with a number of timers to save energy
or to automatically turn the system off and on (to avoid an unproductive
waiting period during warming up of the system). The timers can be
configured in Océ Settings editor. See chapter 7, 'Océ Power Logic®: Settings
Editor' on page 173 and the on-line help on the Océ Settings Editor for details.
The Océ TDS860 has the following timers.
Low power mode timer
This timer only works for the Océ TDS860 printer. After the time defined in
the Océ Settings Editor, the printer uses a little less power and cools down
slightly.
You can disable the Low power mode timer in the Océ Settings Editor
Note:
(see 'Find system settings in the Settings Editor' on page 187).
Sleep mode timer
This timer works for both the Océ TDS860 printer and the Océ TDS800
scanner (not for the Océ TDS600 scanner). After the time defined in the Océ
Settings Editor, the system receives a minimum of power to save on energy
(see 'Find system settings in the Settings Editor' on page 187). The screens
on the operator panels turn off. The printer cools down. When you press a
key on either of the operator panels, the printer or scanner activates. The
printer will need to warm up before becoming operational.
Shut off timer
This timer works for both the Océ TDS860 printer and the Océ TDS800
scanner (not for the Océ TDS600 scanner). After the time defined in the Océ
Settings Editor, the system will turn off entirely (see 'Find system settings in
the Settings Editor' on page 187). This timer only works when the keys in the
power switch on the Océ TDS860 printer and the Océ TDS800 scanner are
set to the timer position.
Wake up timer
This timer works for both the Océ TDS860 printer and the Océ TDS800
scanner (not for the Océ TDS600 scanner). At the time defined in the Océ
Settings Editor, the system turns on automatically (see 'Find system settings
in the Settings Editor' on page 187). This timer only works when the keys in
the power switch on the Océ TDS860 printer and the Océ TDS800 scanner
are set to the timer position.
Figure 6 on page 27 shows the flow of the timers under the following
conditions:
26 Océ TDS860 User Manual