Oce TDS860 User Manual page 144

Right hand side
(left hand side in the feed direction, face-down) by selecting a specific roll or
sheet feeder. If the paper width of the original is larger than the paper width of
the selected roll or sheet feeder, the remaining paper part on the right hand side
will not be scanned (see figure 85).
[85] Example of removing the right hand side of an original
Copying with removed filing strip along the right hand side
Select the required media in the 'Custom' section on the operator panel.
1
Select the 100% value for the 'Zoom' function.
2
Make other settings as required.
3
Feed the original.
4
144 Océ TDS860 User Manual
You can also remove the filing strip along the right hand side
Face up:
Right hand side
- 40 mm
Face down:
left hand side in feed
direction