Making A Scan-To-File On The Océ Tds800 Scanner - Oce TDS860 User Manual

Making a scan-to-file on the Océ TDS800
scanner
Do the following to scan an original to file.
How to scan to file
Place your original face-up, left aligned along the original guide.
1
Select the appropriate original type.
2
Select the 'Destination' card in the 'File' section.
3
[48] 'Destination' card in the file section
Select 'File mode' On.
4
The status message displays: Ready to scan to file.
Select a Destination (see 'Destinations' on page 121).
5
Set the correct settings. (see chapter , 'Settings for scan-to-file' on page 112)
6
Press the start key
7
The original is scanned.
A status message displays (see Figure 49 on page 108):
'Scanning job' 'Scan job number X'
'File scan22.tif'
[49] File card on the Scanner operator panel
108 Océ TDS860 User Manual
.