Custom Card Start Screen; Templates Start Screen - Oce TDS860 User Manual

Custom card start screen

Select the 'Custom' start screen (see figure 11) in the following situations.
If the scanner is used by unexperienced users often
If you must perform many different scan and copy jobs with different
settings.
In the 'Custom' start screen you can press the green start key to start the
original transport immediately.
[11] Operator panel view with "Custom" card selection on the Océ TDS800 scanner
The 'Custom' start screen is the 'Custom card' of template 1. The key
Note:
operator defines the contents in the Océ Settings Editor at the Power Logic
controller.

Templates start screen

Select the 'Templates' start screen (see figure 12 on page 53) in the following
situations.
if the scanner is used by experienced users often
if you must perform many scan and copy jobs with similar settings.
In the 'Templates' start screen first select a template and then start the original
transport with the green start key. To display the 'Templates' section
immediately, press 'Job definition'.
52 Océ TDS860 User Manual