Keys - Oce TDS860 User Manual

Keys

You can make a number of settings for the Océ TDS600 scanner with the keys
on the operator panel.
The following keys are available:
key type
key type
Start keys
Numeric keys
Correction key
Stop key
Job interrupt key
76 Océ TDS860 User Manual
Function
The green key marked with
feeding of the original, or to re-start the copy process.
The keys with numbers on the lower part of the operator
panel are used to enter numbers.
The orange key marked with C is located at the bottom
of the central section of the operating panel. Press the
correction key one time to reset the selected setting to
its default value. Press the correction key two times to
reset the numeric display to '1'. Press the correction key
three times to return to the first screen on the display.
Pressing the red key left of the display stops the copy
process for the current original. You can stop the
original transport immediately when an original jam
occurs.
You use the job interrupt key to set extra priority to your
copy job.
Determine the priority of your copy job with the Job
interrupt key before you scan your originals. The job is
placed on top of the printing queue in the queue
manager. The interrupt job will start running directly
after the current page is completed.
is used to start the