Select The Required Media - Oce TDS860 User Manual

Specify folding options on the operator panel.
8
If the optional folder is installed, you can use the 'Folding' settings to get a
neatly folded copy.
Press the green start key
9
Your original is fed into the scanner. The printer starts.
Collect your output.
10
Your copy will be delivered on the selected output unit of the print engine.

Select the required media

The 'Media' setting can be used to select output material and format. The
display will show you what rolls or sheet feeders are currently loaded. The
currently selected roll or sheet feeder is indicated by the '
If you select 'Automatic', the Océ TDS600 scanner will try to use a roll or
sheet feeder format that matches the original size. After inserting the original,
the roll or sheet feeder that is used is indicated by the '
The ' ' symbol remains in place until a new original is inserted. Then it
Note:
may move to indicate another roll or sheet feeder, depending on the original
format.
First select the paper series, then select the media size.
The zoom factor is based on the selected media size.
Note:
Select the paper series
Select the 'Sheet' card in the 'Original' section
1
Select the required paper series with the 'Paper series' function key
2
Interrupt
Access to
job
Page
[35] Select the required paper series
Select the required media
Select the 'Sheet' card in the 'Print' section.
1
88 Océ TDS860 User Manual
to start the copy job.
Access to
ial
' symbol.
l
' symbol.
m