Rx Setting - Canon FAX-L120 Basic Manual

RX SETTING

Setting Item
1 MEMORY RX MODE
2 INCOMING RINGS
3 REDUCTION RX
ON
OFF
CUT
4 RX PRINT
MEMORY RX
PRINT RX
5 RX MODE
6 FOOTER
7 RX RESTRICTION
8 REMOTE RX
10-7
Sets whether to store received faxes in memory at what
time, with password protection if required. (See Chapter 1,
"Advanced Fax Features," in the Advanced Guide.)
Sets whether the machine is to ring for how many times
before it answers a call.
Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded.
Reduces the image to fit on the size of paper loaded.
Retains the original size of the image.
Truncates the image.
Sets whether to store all received pages in memory before
printing them out or print each page as it is received.
Print after all the pages of the document are received.
Print each page as it is received.
Sets the fax receive mode. (See Chapter 1, "Advanced Fax
Features," in the Advanced Guide.)
Sets whether to insert footer on received faxes to show the
machine's fax number and the sender information.
Sets whether to reject calls from numbers not registered for
speed dialing. (See Chapter 1, "Advanced Fax Features," in
the Advanced Guide.)
Sets whether to enable fax reception remotely using a
handset or telephone. (See Chapter 1, "Advanced Fax
Features," in the Advanced Guide.)
Description