Service Switches; Description For Setting Item In Service Mode - Canon JX500 Service Manual

FAX-JX500 / JX300 / JX200 / JX201

5. SERVICE SWITCHES

5-1 Description for Setting Item in Service Mode

5-1-1 SSSW (Service Soft Switch Setting)
The switch-registered/set items comprise 8-bit switches. The figure below shows which number is
assigned to an applicable bit. Each bit has a value of either 0 or 1.
Below are examples showing how to reads bit switch tables.
BIT
0 Service error code
1 Error dump list
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Receive image transfer
Never change the default of not-available function data.
Fig.Part 1-5 Bit Switch Display
The setting is "1".
FUNCTION
Boldfaced figures are the default
setting.
Fig.Part 1-6 How to Read Bit Switch Tables
Part 1 - 39
The setting is "0".
1
Output
Output
Yes
Maintenance
0
Not, Output
Not, Output
No