Set Mode - Icom IC-440N Instruction Manual

4

SET MODE

■
Set mode
Set mode allows you to change various common settings for
the transceiver, or individual settings for the operating chan-
nel. Essentially, you can customise the transceiver to suit
your preferences and operating style.
Available functions may differ, depending on the pre-setting
using the CS-440N
NOTE: Set mode can be accessed using the
Mode) key after turning ON the power with
(p. 19). In this case, "all set mode" is selectable.
• Squelch Level
Starting item
20
.
CLONING SOFTWARE
• CTCSS/DTCS • Auto Power OFF
• Scan Stop Timer • Lock-out
• Scan Restart • Roger Beep
D
Set mode operation
q
Hold down
mode.
• When no key is pushed for 30 seconds, the transceiver returns
to normal operation.
w
Push
F
SET
e
Push
F
(Set
SET
or
r Hold down
down
F
SET
*Regardless of the assigned key function.
• Backlight • Brightness
• Signal Message • Mic Gain
• PTT Hold • Speaker
F
(Set Mode) for 2 seconds to enter Set
SET
* or * to select the desired item, if necessary.
MONI
T SQL
or to select the desired value of the item.
for 2 seconds to turn OFF the power, or hold
(Set Mode) for 2 seconds to exit Set mode.
• Contrast • Beep
• Beep level
• Own ID
F
: Push
SET
MONI
: Push
T SQL