Description; Hm-182 Description - Icom IC-440N Instruction Manual

■

HM-182 Description

q
w
SCAN
TAG
O G P
RS
CH
SQL
e
Speaker
Information: Up to four desired functions, one each for
Normal and Function mode, can be re-assigned to the
SCAN PRIO
F MONI O G P CH
, , , , ,
SET P
TAG RS
T SQL
SET
tional CS-440N
CLONING SOFTWARE
The default setting is used in this instruction manual, for

description.

N : Stands for Normal mode operation.
F : Stands for Function mode operation. (Push
tion) to enter Function mode.)
o !0 !1
F MONI
SET T SQL
i
u
y
PRIO
SET P
t
LOW
r
Microphone
LOW
and keys with the op-
SQL
. (p. 12)
F
(Func-
SET
q PTT SWITCH [PTT] (p. 16)
 Hold down to transmit; release to receive.
w VOLUME CONTROL/CH UP/CH DOWN KEYS ([VOL])
/
Push to adjust the audio level, to select an operating chan-
nel, Set mode setting and so on. (pp. 14, 19, 20)
[Volume control/Set mode setting]
➥
Push to adjust the audio level (from 0 to 32).
• " " appears when the audio level is set to 0 (silent mode).
➥
Push to select settings in Set mode.
[Channel Selection]
Push , then push /
CH
SQL
(p. 14)
• " " appears when the Channel Selection mode is selected.
e CHANNEL/SQUELCH SELECT KEY
(Channel/Squelch select mode) (pp. 14, 18)
➥
Push to toggle between volume and Channel Selection
mode.
• " " appears when the Channel Selection mode is selected.
• If no key is pushed within 30 seconds, the Channel Selection
mode is cancelled.
 (Squelch level select mode)
➥
Hold down for 2 seconds to enter the squelch level
selection mode, then push
squelch level. (p. 18)
UNIT DESCRIPTION
to select the operating channel.
CH
SQL
or to select the
2
2
7