Icom IC-440N Instruction Manual page 43

t Push
or to select the desired code.
• Select "✱" when Group code is set.
y Push
SCAN
(TX Code CH) to set the selected digit.
TAG
• The editable digit to right is automatically selected to be se-
lected.
u Repeat steps t and y to input all allowed digits.
i After setting the last digit, push
code and return to the TX code channel selection mode.
SCAN
to set the
(TX Code CH)
TAG
SELCALL (Selective Calling)
o Push [PTT] to transmit on the selected TX code channel,
SCAN
or push (TX Code CH) to set the selected TX code
TAG
channel and return to the standby mode.
Appears
Transmitting
NOTE: The TX code editable digit can only be set or
changed with the CS-440N
✓ CONVENIENT!
F
Push (Function) to enter the Function mode, then push
SET
and hold (Call) for 2 seconds to transmit the selected
SCAN
TAG
channel's TX code.
Appears
Transmitting
8
.
CLONING SOFTWARE
8
37