Icom IC-440N Instruction Manual page 48

9
OTHER FUNCTIONS
r Push * to select the desired digit to be edited.
SCAN
TAG
t Select the desired digit using
y Push * to set the digit. The editable digit to its right is
SCAN
TAG
automatically selected.
42
and .
u Repeat steps t and y to input the desired frequency.
F
i Hold down
* for 2 seconds to return to the normal op-
SET
eration mode.
• RX frequency setting is memorised to the channel.
F
• Pushing * also returns to the normal operation mode. In this
SET
case, the RX frequency setting is not memorised to the channel.
(temporary operation)
*Regardless of the assigned key function.