Installing A New Or Replacement Rtm Isdn 1500 Card - Polycom 1500 Hardware Manual

RealPresence Collaboration Server (RMX) 1500 Hardware Guide

Installing a New or Replacement RTM ISDN 1500 Card

Carry out the following procedure to install a new card or to replace the existing card.
To install or replace the RTM ISDN 1500 card:
1 Slide in the RTM ISDN 1500 card.
.
2 Insert the card into the slot and tighten the captive screws on each side of the rear panel of the card,
securing the RTM ISDN card to RMX.
3 Connect the PRI cables.
4 Turn ON the RMX 1500.
5 Login on to the RMX Web Client. When a new ISDN card is installed carry out the following
procedures:
Polycom, Inc. 33