Operating Modes; Normal (Double Conversion) Mode - MGE UPS Systems EX 5 Installation And User Manual

Rt systems
Table of Contents

Advertisement

3.4

Operating Modes

3.4.1

Normal (Double Conversion) Mode

Figure 3-4: Normal (Double Conversion) Mode.
86-86000-00 B01
15
LOAD LEVEL
4kW / 5 kVA
OFF
ON
21
22
15
16
REMAINING TIME
10 minutes
OFF
ON
This is the standard operating mode, set by the
factory.
Two possible cases.
1. If Normal AC source available:
15
LED is ON.
The load is protected by the UPS.
21
Scroll down
allow you to read the UPS measurements (Normal
AC source voltage, Bypass AC source voltage,
operating mode, battery capacity and UPS Serial
Number).
2. If Normal AC source not available:
CAUTION:
15
LED flashes.
16
LED is ON.
The audible alarm sounds intermittently.
The load is now powered by the UPS battery.
This display shows remaining back-up time.
Operation
Installation and User Manual
22
or scroll up
function buttons
Do not operate the Manual
Bypass switch when the UPS is
in Normal mode.
3 — 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex 7Ex 11Ex 11

Table of Contents