Setup And Installation; Scope; Unpacking And Parts Check - MGE UPS Systems EX 5 Installation And User Manual

2.0

Scope

Setup and Installation guides the user through tools and equipment required for connecting the EX 5/7/11 RT, and
battery installation or replacement. Included are assembly instructions, power cable connections with wire diagrams
for configuring the product to hardware specifications.
2.1

Unpacking and Parts Check

Once the EX 5/7/11 RT systems has been inspected and received from the shipping courier, the unit should be
moved to a position as close to the final installation location as possible. See Figures 2-1, on Page 2 — 2.
All Modules are shipped in separate boxes.
Prior to any installation, the following items should be observed upon receipt of the EX 5/7/11 RT.
1. Inspect shipment for any damage prior to receipt. Damage claims should be filed directly with the courier.
Replacements for damaged components should be ordered through MGE Office Protection Systems Customer
Support Services at 1-800-438-7373.
2. Remove wrapping and foam corners to verify that the equipment nameplate (located on the rear of the units)
details a system that corresponds with the equipment ordered.
86-86000-00 B01

Setup and Installation

Installation 2 — 1