Mge ups systems installation and user manual evolution s 1250 rt 2u, s 1750 rt 2u, 2000 rt 2u, s 2500 rt 2u, s 3000 rt 2u, s 3000 rt 3u, s exb 1250, s exb 1750 rt 2u, s exb 2500, s exb 3000 rt 2u, s exb 2500, s exb 3000 rt 3u (22 pages)
EX Rack . For service call 1-800-523-0142. Sincerely, MGE UPS SYSTEMS Federal Communications Commission (FCC) Statement Note: this equipment has been tested and found to comply with Part 15 of the FCC Rules.
Page 3
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for Models EX20Rack / EX30Rack / EXB20/30 that should be followed during installation and maintenance of the UPS batteries. This equipment can be operated by any individual, with no previous training;...
Page 4
UPSs, you can count on backup from our staff, a team of specialists, around the corner from you, throughout the world. It’s no accident that MGE UPS SYSTEMS is the world leader in UPS protection. The UPS provides power factor correction to reduce...
Page 5
UPS. It can then be temporarily managed using SNMP or the various software modules of Solution-Pac. The MGE UPS SYSTEMS offering complies with RFC 1628 specifications (IETF) and was certified by the InterWorking Labs during the Test Summit in June 1994;...
Page 6
Pulsar EX20 Rack and EX30 Rack To meet the different operating environments of your UPS, Pulsar EX Rack includes 2 MGE UPS SYSTEMS software programs: EX-Driver software for Windows Network based Solution-Pac power management software EX-Driver for Windows...
Page 7
Pulsar presentation getting started / operation Pulsar EX Rack : 86-153500-00 MGE UPS SYSTEMS Pulsar EX20 Rack / EX30 Rack / EXB20/30 presentation MGE UPS SYSTEMS Pulsar EX Rack : 86-153500-00...
Page 8
Pulsar EX20 Rack / EX30 Rack front view Pulsar EX Rack : 86-153500-00 Pulsar EX20 Rack rear view MGE UPS SYSTEMS Pulsar EX Rack : 86-153500-00 MGE UPS SYSTEMS...
Page 9
Pulsar EX30 Rack rear view MGE UPS SYSTEMS Pulsar EX Rack : 86-153500-00...
Page 10
é m e n t l o g i c i e l d e v o t r e o n d u l e u r Pulsar EX Rack : 86-153500-00 PLACE STAMP HERE MGE UPS SYSTEMS...
LED on continuously: load powered by UPS, green indicator light off: load no powered by UPS, MGE UPS SYSTEMS "function" button: switches off audio warning device or measures load charge percentage (if utility power present), "ON/OFF" switch:...
50dBA for operation on utility power 50dBA for battery backup mode 0 to 35 C 0 to 90% non condensing Pulsar EX20 Rack 5.12 H/3U 21.75 88(40) Pulsar EX Rack : 86-153500-00 Pulsar EX30 Rack 5.12 21.75 92(42) MGE UPS SYSTEMS...
Page 13
1500 VA 750 VA Pulsar EX30 Rack battery back-up time 2000 VA 1500 VA 1000 VA 500 VA MGE UPS SYSTEMS Pulsar EX30 Rack alone Pulsar EX30 Rack + 1 Pulsar EXB20/30 Pulsar EX30 Rack + 2 Pulsar EXB20/30 t (hours)
Page 14
Pulsar EX Rack : 86-153500-00 MGE UPS SYSTEMS...
MGE UPS SYSTEMS getting started ... 12 location ... 12 preliminary checks ... 12 connections ... 12 communication ... 13 operation ... 14 starting up with utility power present ... 14 starting up with out utility power ... 15 operation on battery ...
U-Talk communication port, at the rear of the Pulsar, delivers information in the form of an RS232 series link supported by the communication protocol exclusive to MGE UPS SYSTEMS. The Solution-Pac programs use the data made available by this protocol.
(here 50%) several beeps silence your load is supported by the battery Pulsar EX Rack : 86-153500-00 normal operation 17 s indicating the recharge percentage of the battery (here 50%) silence UPS is on utility power MGE UPS SYSTEMS...
"on/off" button: indicator lights test automatic sequence: 1 s beep output off output off MGE UPS SYSTEMS device and battery test indicating the remaining battery time percentage (here 50%) several beeps 3 s beep...
(push again three times within 5 seconds). Pulsar EX Rack : 86-153500-00 Pulsar switches off automatically silence UPS output "off" load charge percentage If utility power is present, hold alarm silence button in: silence indicating the load charge percentage: here 50% MGE UPS SYSTEMS...
Pulsar. To acknowledge the fault, release the "on/ off" button, temporarily disconnected Pulsar from the wall socket (check input cord), disconnect loads and re-start Pulsar. MGE UPS SYSTEMS operating anomalies device fault 1 beep every second automatic load transfer to bypass, switch off Pulsar (release "on/off"...
Page 22
Pulsar EX Rack : 86-153500-00 MGE UPS SYSTEMS...
MGE UPS SYSTEMS, Inc., and represents a proprietary article in which MGE UPS SYSTEMS, Inc., retains any and all patent rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this information does not convey any permission to reproduce, print, or manufacture the article or articles shown herein.
Page 24
MGE UPS SYSTEMS, Inc. www.mgeups.com 86-153500-00 Postal address: 1660 Scenic Avenue Costa Mesa, CA 92626 714-557-1636...
Need help?
Do you have a question about the Pulsar EX20Rack and is the answer not in the manual?
Questions and answers