Table of Contents
Advertisement
A wide range of optional cards will allow your UPS to talk to nearly all equipment management systems, making
integration faster and easier. All these cards can plug directly into the UPS, saving time and money on your next
UPS project. (Meta UPS Card and U-Talk/Basic Acquisition Cards are used exclusively with Multi-slot.)
Dual U-Talk/Basic Card
JBus Card
Dual port SHUT Card
USB Card
Dual port AS/400 Relay
Status Card
6 Alarm Relay Card
XML-Web Card
Network Management Card (PN: 66074) Features a web interface, Simple Network Management Protocol
Environmental Sensor
86-86000-00 B01
(PN: 66060) CAN NOT BE USED WITH THIS UPS.
(PN: 66061) Provides RS232 and RS485 connections for using the JBUS/ModBus
protocol. Both connections are female DB9. Only one connector can be used for
proper operation.
(PN: 66066) Has two independent female DB9 communication ports that use Serial
HID UPS Transfer (SHUT) protocol. Used with the UPS Control LCD display.
(PN: 66067) For direct communications (via USB) with the customer's server and
automatic UPS recognition by the power management software of Windows 2000,
XP or 2003 Server, or Macintosh OS 9 and 10.
(PN: 66068) CAN NOT BE USED WITH THIS UPS.
(PN: 66069) Provides status in the form of 6 Alarm relays (250V 2A rated relays).
Connection provided are 12 terminal block wire clips.
(PN: 66073) Features a web interface and keeps log files about UPS operation.
(SNMP), Simple Mail Transfer Protocol (SMTP) email notification and keeps log files
about UPS operation.
(PN:66846) For Network Management Card: Monitors temperature, humidity, and
status of 2 dry contact inputs.
Installation
Installation and User Manual
2 — 11
Advertisement
Table of Contents
