Table of Contents
Advertisement
EX 5/7/11 RT Systems
3.3.1
UPS personalization through external software
Insert the Solution-Pac 2 CD ROM in your CD drive.
◗
At the first Navigator Screen, select "Installation" and follow the instructions to install
Solution-Pac 2 for Windows.
◗
If nothing appears, launch startup.exe
◗
Then go to "Advanced settings" and "UPS settings".
Please note that the Linux/Unix/MacOS versions of Personal Solution-Pac do not include this feature.
3.3.2
Final Startup sequence
Press the <ON> button more than 3 seconds.
◗
After UPS internal test sequence, the green LED
CAUTION
3 — 6
During the startup, if the Bypass AC source is out of tolerance, there
will be a 10msec output interrupt.
Operation
15
goes on.
86-86000-00 B01
Advertisement
Table of Contents
