Maintenance; Personalisation Using External Software - MGE UPS Systems 4000 RT Installation And User Manual

4. Access to measurements and personalisation data
Battery settings
Function
Auto Battery Test
Low Batt Warning
User Batt Settings
Deep Disch Protect

4.5 Maintenance

Function
Model
Alarm History
Manual Batt Test
Led & Buzzer Test
Life Cycle Monitoring
Statistics
Operation Limits

4.6 Personalisation using external software

◗ Insert the Solution-Pac CD-ROM in the drive.
On the first navigation screen, select
◗
Solution-Pac software.
◗ Then select
Note that only the Windows versions of the Personal Solution-Pac software offer this possibility.
Factory setting
Everyweek
20%
UPS reads number of
battery modules
connected
Yes
Sub-Function
Power Module
Frame
Read
Erase
Manual Battery Test
Led & Buzzer Test
LCM
Auto Statistics
Custom Statistics
Operation Limits
"
Point to Point solution
" " "
Settings , Advanced settings
Options
No test / everyday /
everyweek /everymonth
0 to 100%
From 0 to 40 Ah
No
Option / Display
SN: xxxxxxxxx
SOFT: xxx
NT: xxx
Description
Date Hour
Alarm xxx
No / Yes
No / Yes
No / Yes
Enable / Disable
Statistics
Reset Date ?
Are you sure ?
"
and follow the instructions on how to install the Personal
" " "
and UPS settings .
Comments
1% increment
5 Ah increment
Protection against deep discharge.
If disable, MGE UPS SYSTEMS
warranty will be void
Comments
Serial number
Soft version
Technical level
10 alarms can be stored
automatically
Life cycling monitoring alarms
You need to register at
www.mgeups.com/Icm to get the
code and get access to free statistics
Automatic alarms displayed when
UPS is operating near the limits
- Page 27
34008030EN/AA