Port Forwarding Edit - ZyXEL Communications PMG5318-B20A User Manual

Chapter 7 NAT

7.3.1 Port Forwarding Edit

Use this screen to modify a port forwarding rule. Click an Edit icon next to a pre-defined port
forwarding service rule in the Network > NAT > Port Forwarding screen to open the following
screen.
Figure 43 Port Forwarding Edit
The following table describes the fields in this screen.
Table 28 Port Forwarding Edit
LABEL
Active
Service Name
Start Port
End Port
Server IP Address
Protocol
Back
Apply
Cancel
78
DESCRIPTION
This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.
This field displays the name of the service used by the packets for this virtual server.
This is the first internal or external port number that identifies a service.
This is the last internal or external port number that identifies a service.
This field displays the inside IP address of the server.
This field displays the corresponding IP protocol (TCP, UDP or TCP/UDP) for the
service. Select another protocol if you want to change it.
Click Back to ignore unsaved changes you made on this screen and go back to the
previous screen.
Click Apply to save your changes back to the GPON Device.
Click Cancel to return to the previous configuration.
PMG5318-B20A User's Guide