Analog Phone; Speed Dial - ZyXEL Communications PMG5318-B20A User Manual

Chapter 9 Voice

9.4 Analog Phone

Use this screen to link the GPON Device's analog phone ports with one or more SIP accounts to
handle outgoing and incoming calls. Click VoIP > Phone. The following screen displays.
Figure 47 VoIP > Phone > Analog Phone
Each field is described in the following table.
Table 32 VoIP > Phone > Analog Phone
LABEL
Phone Port Selection
Phone Port
Selection
Phone to SIP Account
SIP Account
SIP Number
Service Provider This indicates the service provider used by this SIP account.
SIP Account
Status
Apply
Cancel

9.5 Speed Dial

Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You also have to
create speed-dial entries if you want to call SIP numbers that contain letters. Once you have
configured a speed dial rule, you can use a shortcut (the speed dial number, #01 for example) on
your phone's keypad to call the phone number.
90
DESCRIPTION
Select a phone port to configure on this screen.
This indicates the SIP account mapping to the phone port for both incoming and
outgoing calls. Select None to disable the phone port so you cannot receive and make
calls through the phone port.
This indicates the SIP account's number. You can click it to open the SIP Account
screen, where you can change it.
This indicates whether the account is active or not. Click it to open the SIP Account
screen, where you can change the status.
Click this to save your changes.
Click this to exit the screen without saving any changes.
PMG5318-B20A User's Guide