ZyXEL Communications PMG5318-B20A User Manual page 22

Chapter 3 Status Screens
Each field is described in the following table.
Table 3 Status
LABEL
Device Information
Host Name
Model Name
Firmware Version
WAN Status
Mode
IP Address
IP Subnet
Mask
Default
Gateway
First/Second/
Third DNS
Server
IPv6 Global
Address
IPv6 Link local
Address
IPv6 First/
Second/Third
DNS Server
LAN Information
IP Address
IP Subnet
Mask
MAC Address
22
DESCRIPTION
This field displays the GPON Device system name. It is used for identification.
You can change this in the Maintenance > System > General screen's
System Name field.
This is the model name of the GPON Device.
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
This section displays connection information for each WAN connection configured
on the GPON Device.
This is the method of encapsulation used by your service provider for this WAN
connection.
This field displays the IP address of the WAN connection.
This field displays the WAN connection's subnet mask.
This field displays the IP address of the default gateway, if applicable.
These are the DNS server IP addresses assigned to the WAN connection.
This is the IPv6 global address of the WAN connection.
This is the link-local address assigned to the WAN connection.
These are the IPv6 DNS server IP addresses assigned to the WAN connection.
This field displays the current IP address of the GPON Device in the LAN. Click
this to go to the screen where you can change it.
This field displays the GPON Device's current subnet mask in the LAN.
This shows the LAN Ethernet adapter MAC (Media Access Control) address of
your GPON Device.
PMG5318-B20A User's Guide