ZyXEL Communications PMG5318-B20A User Manual page 91

Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. To access this
screen, click VoIP > Phone Book > Speed Dial.
Figure 48 VoIP > Phone Book > Speed Dial
Each field is described in the following table.
Table 33 VoIP > Phone Book > Speed Dial
LABEL
Speed Dial
#
Number
Description
Add
Speed Dial Phone
Book
#
Number
Destination
Modify
PMG5318-B20A User's Guide
DESCRIPTION
Use this section to create or edit speed-dial entries.
Select the speed-dial number you want to use for this phone number.
Enter the SIP number you want the GPON Device to call when you dial the speed-dial
number.
Enter a description for this speed dial number. You can use up to 128 alphanumeric
characters.
Click this to use the information in the Speed Dial section to update the Speed Dial
Phone Book section.
Use this section to look at all the speed-dial entries and to erase them.
This field displays the speed-dial number you should dial to use this entry.
This field displays the SIP number the GPON Device calls when you dial the speed-dial
number.
This field is blank, if the speed-dial entry uses one of your SIP accounts. Otherwise, this
field shows the IP address or domain name of the SIP server or other party. (This field
corresponds with the Type field in the Speed Dial section.)
Use this field to edit or erase the speed-dial entry.
Click the Edit icon to copy the information for this speed-dial entry into the Speed Dial
section, where you can change it.
Click the Remove icon to erase this speed-dial entry.
Chapter 9 Voice
91