Quality Of Service (Qos); Overview; The Qos General Screen - ZyXEL Communications PMG5318-B20A User Manual

8.1 Overview

Use the QoS screen to set up your GPON Device to use QoS for traffic management.

8.2 The QoS General Screen

Use this screen to enable or disable QoS and configure the QoS settings for services.
Click Network > QoS to open the screen as shown next.
Figure 44 Network > QoS > General
The following table describes the labels in this screen.
Table 29 Network > QoS > General
LABEL
Enable QoS
Service Configuration
DSCP
Pbit
Apply
Cancel
PMG5318-B20A User's Guide
C

Quality of Service (QoS)

DESCRIPTION
Use this field to turn on QoS to improve your network performance.
Use this section to configure the DSCP and priority bit settings for VoIP/SIP, VoIP/RTP,
RTSP, IGMP, and TR069 traffic.
This is the DSCP number (0~63) added to traffic of this classifier.
This is the IEEE 802.1p priority level (0~7) assigned to traffic of this classifier. The
lower the number the higher the priority.
Click this to save your changes.
Click this to restore your previously saved settings.
H A PT ER
8
79