No Security; Wep Encryption - ZyXEL Communications PMG5318-B20A User Manual

Chapter 6 Wireless LAN

6.3.1 No Security

In the Network > Wireless LAN > Security screen, select No Security from the Security Mode
list to allow wireless devices to communicate with the GPON Device without any data encryption or
authentication.
Note: If you do not enable any wireless security on your GPON Device, your network is
accessible to any wireless networking device that is within range.
Figure 20 Network > Wireless LAN > Security: No Security
The following table describes the labels in this screen.
Table 14 Network > Wireless LAN > Security: No Security
LABEL
SSID Select
Security Mode

6.3.2 WEP Encryption

Use this screen to configure and enable WEP encryption. Click Network > Wireless LAN >
Security to display the Security screen. Select Static WEP from the Security Mode list.
48
DESCRIPTION
Select the SSID for which you are configuring security settings.
Choose No Security from the drop-down list box.
PMG5318-B20A User's Guide