ZyXEL Communications PMG5318-B20A User Manual page 84

Chapter 9 Voice
Table 30 VoIP > SIP > SIP Service Provider (continued)
LABEL
SIP Server Port
REGISTER Server
Address
REGISTER Server
Port
SIP Service Domain Enter the SIP service domain name or the SIP server's IP address. In the full SIP URI,
SIP Local Port
Apply
Cancel
Advanced Setup
Timer Settings
Registration Period
Register Expires
Register Re-send
Timer
Session Expires
Min-SE
DSCP Tag
SIP DSCP Priority
Setting
RTP DSCP Priority
Setting
RTP Port Range
Start Port
End Port
84
DESCRIPTION
Enter the SIP server's listening port number, if your VoIP service provider gave you one.
Otherwise, keep the default value.
Enter the IP address or domain name of the SIP register server, if your VoIP service
provider gave you one. Otherwise, enter the same address you entered in the SIP
Server Address field. You can use up to 256 printable English keyboard characters.
Enter the SIP register server's listening port number, if your VoIP service provider gave
you one. Otherwise, enter the same port number you entered in the SIP Server Port
field.
this is the part after the @ symbol. You can use up to 256 printable English keyboard
characters.
Enter the GPON Device's listening port number, if your VoIP service provider gave you
one. Otherwise, keep the default value.
Click this to save your changes.
Click this to exit the screen without saving any changes.
Click this to display the following advanced settings for this SIP account.
Enter the number of seconds allocated for the GPON Device to register with a SIP
service.
Enter the number of seconds your SIP account is registered with the SIP register server
before the registration is downgraded to 'inactive' and all SIP functions for the account
are blocked. The GPON Device automatically tries to re-register your SIP account when
one-half of this time has passed. (The SIP register server might have a different
expiration, which takes priority over this setting.)
Enter the number of seconds the GPON Device waits before it tries again to register the
SIP account, if the first try failed or if there is no response.
Enter the number of seconds the SIP server waits for a 'keep alive' signal from the
GPON Device before disconnecting the call. The keep alive signal is periodically sent
from the GPON Device during a call as long as the connection between it and the server
remains constant. If interference happens somewhere along the line, or the connection
is unexpectedly terminated, then the SIP server uses this setting as a timer to
automatically disconnect the call.
Enter the minimum number of seconds the GPON Device accepts for a session
expiration time when it receives a request to start a SIP session. If the request has a
shorter time, the GPON Device rejects it.
Enter the DSCP (DiffServ Code Point) number for SIP message transmissions. The
Device creates Class of Service (CoS) priority tags with this number to SIP traffic that it
transmits.
Enter the DSCP (DiffServ Code Point) number for RTP voice transmissions. The Device
creates Class of Service (CoS) priority tags with this number to RTP traffic that it
transmits.
Enter the listening port number(s) for RTP traffic, if your VoIP service provider gave you
this information. Otherwise, keep the default values.
To enter one port number, enter the port number in the Start Port and End Port fields.
To enter a range of ports,
• enter the port number at the beginning of the range in the Start Port field
• enter the port number at the end of the range in the End Port field.
PMG5318-B20A User's Guide