Navigation Panel - ZyXEL Communications PMG5318-B20A User Manual

2.2.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure GPON Device features.
The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK
Status
Network
WAN
LAN
Wireless LAN
NAT
QoS
VoIP
SIP
Phone
Phone Book
Usb Services
File Sharing
PMG5318-B20A User's Guide
TAB FUNCTION
This screen shows the GPON Device's general device and network
status information. Use this screen to access the statistics and client
list.
Internet Access Use this screen to configure ISP parameters, WAN IP address
Setup assignment, DNS servers and other advanced properties.
Default Use this screen to configure your ONT's default gateway settings.
Gateway
Multicast Setup Use this screen to configure your ONT's IGMP settings.
IP & DHCP Use this screen to configure LAN TCP/IP and DHCP settings, enable Any
IP and other advanced properties.
Client List Use this screen to look at the IP addresses currently assigned to DHCP
clients and the IP addresses reserved for specific MAC addresses.
Port Speed Use this screen to configure your ONT's LAN port speed settings.
General Use this screen to turn the wireless connection on or off, configure the
MAC filter, and make other basic configuration changes.
Security Use this screen to set up wireless security.
WPS Use this screen to enable or disable WPS, generate a security PIN
(Personal Identification Number) and see information about the ONT's
WPS status.
WPS Station Use this screen to set up WPS by pressing a button or using a PIN.
MAC Filter Use this screen to allow or deny MAC address(es) for specific wireless
networks.
WMM Use this screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of
service in wireless networks for multimedia applications.
Status Use this screen to view all accociated wireless clients and their status.
Isolation Use this screen to control whether associated wireless clients can
communicate with each other across a different wireless network
through the GPON Device.
Port Forwarding Use this screen to configure port forwarding rules.
General Use this screen to enable and configure QoS settings for specific traffic.
SIP Service Use this screen to configure the SIP settings used by the GPON Device
Provider when you place calls over the Internet.
SIP Account Use this screen to configure your SIP account information.
Analog Phone Use this screen to set which phone ports use which SIP accounts.
Speed Dial Use this screen to configure speed dial for SIP phone numbers that you
call often.
Share Use this screen to enable file sharing via the GPON Device.
Configuration
Account Use this screen to configure user accounts to access file shares.
Management
Chapter 2 The Web Configurator
17