Navigation Panel - ZyXEL Communications PMG2006-T20A User Manual

2.2.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure PMG2006-T20A features. The
following tables describe each menu item.
Table 5 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Home
Networking
Routing
NAT
DNS
Interface
Grouping
Security
Firewall
Chapter 2 The Web Configurator
TAB FUNCTION
This screen shows the network status of the PMG2006-T20A and
computers/devices connected to it.
Broadband Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional Use this screen to configure IP alias and public static IP.
Subnet
TFTP Server Name Configure a TFTP server name which is sent to clients using DHCP option
66.
Static Route Use this screen to view and set up static routes on the PMG2006-T20A.
DNS Route Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Policy Route Use this screen to configure policy routing on the PMG2006-T20A.
RIP Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
Port Forwarding Use this screen to make your local servers visible to the outside world.
Applications Use this screen to configure servers behind the PMG2006-T20A.
Port Triggering Use this screen to change your PMG2006-T20A's port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your PMG2006-T20A's address mapping
settings.
Sessions Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the PMG2006-T20A.
DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
Interface Use this screen to map a port to a PVC or bridge group.
Grouping
General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
PMG2006-T20A User's Guide
20