Xerox WorkCentre 5845 Getting Started Manual page 31

Optional
• Paper Tray 6 high capacity paper tray.
• Tray 6 Large Paper Kit converts paper tray 6 to hold larger paper sizes.
• Tray 6 A4 Short Edge Feed Kit converts paper tray 6 into a short edge feed tray.
• Envelope Tray this tray is fitted instead of paper tray 2 to enable envelope printing. Up to 55 #10
Envelope s (4.1"x 9.5") can be loaded in the tray.
• Paper Tray 7 (Inserter) adds pre-printed sheets into copy sets. This is only available with the high
volume finisher or high volume finisher with booklet maker.
• Paper Tray Lock Kit locks the trays so that paper cannot be removed, this is a useful feature in
libraries.
• Offset Catch Tray delivers collated or uncollated output.
• Office Finisher stacks, collates, staples and offsets your output. A hole punch kit is also available
for this finisher.
• Office Finisher 2 Hole Punch Kit enables the Office Finisher to make 2 hole punches. Other hole
punch kits are available for this finisher. Only one hole punch kit can be fitted at one time.
• Office Finisher 3 Hole Punch Kit enables the Office Finisher to make 3 hole punches. Other hole
punch kits are available for this finisher. Only one hole punch kit can be fitted at one time.
• Office Finisher 4 Hole Punch Kit enables the Office Finisher to make 4 hole punches. Other hole
punch kits are available for this finisher. Only one hole punch kit can be fitted at one time.
• Office Finisher Swedish 4 Hole Punch Kit enables the Office Finisher to make 4 hole punches.
Other hole punch kits are available for this finisher. Only one hole punch kit can be fitted at one
time.
• Office Finisher with Booklet Maker creates booklets, collates, offsets, stacks and staples your
output. Hole punch kits can be installed with this finisher.
• High Volume Finisher collates, offsets, stacks and staples your output. Hole punch kits can be
installed with this finisher.
• High Volume Finisher 2 Hole Punch Kit enables the High Volume Finisher to make 2 hole punches.
Other hole punch kits are available for this finisher. Only one hole punch kit can be fitted at one
time.
• High Volume Finisher 3 Hole Punch Kit enables the High Volume Finisher to make 3 hole punches.
Other hole punch kits are available for this finisher. Only one hole punch kit can be fitted at one
time.
• High Volume Finisher 4 Hole Punch Kit enables the High Volume Finisher to make 4 hole punches.
Other hole punch kits are available for this finisher. Only one hole punch kit can be fitted at one
time.
• High Volume Finisher Swedish 4 Hole Punch Kit enables the High Volume Finisher to make 4 hole
punches. Other hole punch kits are available for this finisher. Only one hole punch kit can be fitted
at one time.
• High Volume Finisher with Booklet Maker creates booklets, collates, offsets, stacks and staples
your output. Tri-fold and Hole Punch kits can be installed with this finisher.
• Trifolder available with the High Volume Finisher with Booklet Maker. Enables the finisher to
produce tri-folded documents in a C fold or a Z fold.
• Convenience Stapler for manual stapling. The Convenience Shelf must be installed.
• Convenience Shelf a shelf which can be installed on the left side of the device.
®
WorkCentre 5845/5855/5865/5875/5890
Getting Started Guide
Getting Started
29