The Add New 3G Dongle Screen - ZyXEL Communications SBG3300-N series User Manual

Chapter 5 Broadband

5.4 The Add New 3G Dongle Screen

Use the Add New 3G Dongle screen to view and manage the list of 3G dongles the Device can use
for a 3G backup connection.
connect the 3G USB dongle.
Click Network Setting > Broadband > Add New 3G Dongle to display the following screen.
Figure 26 Network Setting > Broadband > Add New 3G Dongle
The following table describes the labels in this screen.
Table 11 Network Setting > Network Setting > Add New 3G Dongle
LABEL
Add New Entry
#
Default
VID:PID
Target VID:PID
Port
Class
Message
Content
Modify
58
Section 1.1 on page 17
DESCRIPTION
Click this to go to a screen where you can enter information for a new 3G dongle and add it.
See Section 5.4.1 on page 59
This is the number of the entry.
This is the default vendor ID and product ID of the 3G dongle.
This is the target vendor ID and product ID of the 3G dongle.
This is the specified device port of the 3G dongle.
This is the target device class of the 3G dongle.
This shows the input message content of the 3G dongle.
Click the Edit icon to modify the information of a 3G dongle.
Click the Delete icon to remove it.
explains to which USB port you need to
for more information
SBG3300-N Series User's Guide