ZyXEL Communications SBG3300-N series User Manual page 29

Table 3 Navigation Panel Summary (continued)
LINK
TR-069 Client
SNMP
Time
Email
Notification
Log Setting
Firmware
Upgrade
Configuration
Reboot
Diagnostic
SBG3300-N Series User's Guide
TAB FUNCTION
Use this screen to configure the Device to be managed by an Auto
Configuration Server (ACS).
Use this screen to enable/disable and configure settings for SNMP.
Use this screen to change your Device's time and date.
Use this screen to configure up to two mail servers and sender
addresses on the Device.
Use this screen to change your Device's log settings.
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
Use this screen to reboot the Device without turning the power off.
Ping & Use this screen to identify problems with the DSL connection. You can
Traceroute & use Ping, TraceRoute, or Nslookup to help you identify problems.
Nslookup
802.1ag Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
OAM Ping Use this screen to view information to help you identify problems with
the DSL connection.
Chapter 2 The Web Configurator
29