Quality Of Service (Qos); Overview; What You Can Do In This Chapter - ZyXEL Communications SBG3300-N series User Manual

9.1 Overview

Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, and
the networking methods used to control the use of bandwidth. Without QoS, all traffic data is
equally likely to be dropped when the network is congested. This can cause a reduction in network
performance and make the network inadequate for time-critical application such as video-on-
demand.
Configure QoS on the Device to group and prioritize application traffic and fine-tune network
performance. Setting up QoS involves these steps:
Configure classifiers to sort traffic into different flows.
1
Assign priority and define actions to be performed for a classified traffic flow.
2
The Device assigns each packet a priority and then queues the packet accordingly. Packets assigned
a high priority are processed more quickly than those with low priority if there is congestion,
allowing time-sensitive applications to flow more smoothly. Time-sensitive applications include both
those that require a low level of latency (delay) and a low level of jitter (variations in delay) such as
Voice over IP (VoIP) or Internet gaming, and those for which jitter alone is a problem such as
Internet radio or streaming video.
This chapter contains information about configuring QoS and editing classifiers.

9.1.1 What You Can Do in this Chapter

• The General screen lets you enable or disable QoS and set the upstream bandwidth
on page 133).
• The Queue Setup screen lets you configure QoS queue assignment
• The Class Setup screen lets you add, edit or delete QoS classifiers
• The Policer Setup screen lets you add, edit or delete QoS policers
• The Monitor screen lets you view the Device's QoS-related packet statistics
143).
SBG3300-N Series User's Guide
C
H A PT ER

Quality of Service (QoS)

9
(Section 9.3
(Section 9.4 on page 134).
(Section 9.5 on page 136).
(Section 9.5 on page 136).
(Section 9.7 on page
131