The Add New 3G Dongle Screen; Add 3G Dongle Information - ZyXEL Communications SBG3500-N000 User Manual

6.4 The Add New 3G Dongle Screen

Use the Add New 3G Dongle screen to view and manage the list of 3G dongles the SBG3500-N
Series can use for a 3G backup connection.
Click Network Setting > Broadband > Add New 3G Dongle to display the following screen.
Figure 27 Network Setting > Broadband > Add New 3G Dongle
The following table describes the labels in this screen.
Table 12 Network Setting > Network Setting > Add New 3G Dongle
LABEL
Add New Entry
#
Default
VID:PID
Target VID:PID
Port
Class
Message
Content
Modify

6.4.1 Add 3G Dongle Information

Click Add New Entry in the Add New 3G Dongle screen to show the following. Enter the
information for a new 3G dongle to add it.
Figure 28 Add 3G Dongle Information
Chapter 6 Broadband
DESCRIPTION
Click this to go to a screen where you can enter information for a new 3G dongle and add it.
See Section 6.4.1 on page 118
This is the number of the entry.
This is the default vendor ID and product ID of the 3G dongle.
This is the target vendor ID and product ID of the 3G dongle.
This is the specified device port of the 3G dongle.
This is the target device class of the 3G dongle.
This shows the input message content of the 3G dongle.
Click the Edit icon to modify the information of a 3G dongle.
Click the Delete icon to remove it.
SBG3500-N Series User's Guide
for more information
118