ZyXEL Communications SBG3300-N series User Manual page 39

Table 4 Status Screen (continued)
LABEL
CPU Usage
Memory
Usage
WAN Status
Status
Mode
IP Address
Connection
Speed (DL/UL)
IPSec VPN Status
#
Name
Application
Scenario
Remote
Gateway
Address
SBG3300-N Series User's Guide
DESCRIPTION
This field displays what percentage of the Device's processing ability is currently used. When
this percentage is close to 100%, the Device is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using QoS; see
This field displays what percentage of the Device's memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the Device
is probably becoming unstable, and you should restart the device. See
279, or turn off the device (unplug the power) for a few seconds.
The field displays Up when the Device is using the interface and Down when the Device is
The field displays whether the interface is in Active or Passive mode.
The field displays the IP address of the interface.
The field displays the connection type of the interface.
The field displays the speed of the interface's connection.
This is the VPN policy index number.
This field displays the identification name for the IPSec SA.
This field displays the scenario type for the IPSec SA.
This field displays the remote gateway Address used in the SA.
Chapter 4 Status Screens
Chapter 9 on page 131).
Section 36.2 on page
39