The Upnp Screen - ZyXEL Communications SBG3300-N series User Manual

Chapter 7 LAN
If you click Add new static lease in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays.
Figure 56 Static DHCP: Add/Edit
The following table describes the labels in this screen.
Table 35 Static DHCP: Add/Edit
LABEL
Active
Group Name
Select Device Info
MAC Address
IP Address
Apply
Cancel

7.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 104
110
DESCRIPTION
Select this to activate the connection between the client and the Device.
Select the interface group name for which you want to configure static DHCP settings.
See Chapter 12 on page 169
If you select Manual Input, you can manually type in the MAC address and IP address of
a computer on your LAN. You can also choose the name of a computer from the drop list
and have the MAC Address and IP Address auto-detected.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
for how to create a new interface group.
SBG3300-N Series User's Guide