ZyXEL Communications SBG3300-N series User Manual page 276

Chapter 35 Firmware and WWAN Package Upgrade
The following table describes the labels in this screen.
Table 124 Maintenance > Firmware Upgrade
LABEL
Current Firmware
Version
File Path
Browse...
Upload
Current WWAN
Package Version
File Path
Browse...
Upload
After you see the firmware updating screen, wait two minutes before logging into the Device again.
Figure 154 Firmware Uploading
The Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 155 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
276
DESCRIPTION
This is the present firmware version
Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
This is the current version of the WWAN (Wireless Wide Area Network) package
installed on the Device. A WWAN package adds support for more USB 3G dongles
without you having to upgrade the Device firmware.
Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Click this to find the WWAN file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
SBG3300-N Series User's Guide