ZyXEL Communications SBG3300-N series User Manual page 257

The following table describes the labels in this screen.
Table 116 Users Configuration: Add/Edit
LABEL
User Name
Password
Verify Password
New Password
Verify Password
Retry Times
Idle Timeout
Lock Period
Group
File Sharing Service
(SAMBA)
File Share Name
File Share Directory
File Sharing
Writable
Apply
Cancel
SBG3300-N Series User's Guide
DESCRIPTION
This field is read-only if you are editing the user account.
Enter a descriptive name for the user account. The user name can be up to 15
alphanumeric characters (0-9, A-Z, a-z, -, _ with no spaces). With advanced account
security enabled, the user names must be a minimum length of six characters and
include both letters and numbers.
Specify the password associated to this account. The password can be 6 to 15
alphanumeric characters (0-9, A-Z, a-z, -, _ with no spaces), not containing the user
name. It must contain both letters and numbers.
The characters are displayed as asterisks (*) in this field.
Enter the exact same password that you just entered in the above field.
This field is displayed only when you are editing the user account.
Type your new system password (6 to 15 alphanumeric characters (0-9, A-Z, a-z, -, _
with no spaces), not containing the user name).
This field is displayed only when you are editing the user account.
Enter the exact same password that you just entered in the above field.
The Device can lock a user out if you use a wrong user name or password to log in the
Device.
Enter up to how many times a user can re-enter his/her account information before the
Device locks the user out.
Enter the number of minutes that the system can idle before being logged out.
Enter the number of minutes for the lockout period. A user cannot log into the Device
during the lockout period, even if he/she enters correct account information.
This field is read-only if you are editing the user account.
Select a type of login account. The web configurator screens and privileges vary
depending on which account type you use to log in. Administrator accounts can
configure the Device while User accounts can only view some status information.
Users logged in with either type of account can access the Internet.
Select Enable to allow the file sharing feature with this user account. This allows the
user to access shared files in USB storage. Samba allows file and print sharing between
computers running Windows and computers running Unix.
Enter a name for the shared resource (profile). For example, the user can connect to
192.168.1.1/<File Share Name>.
Enter the shared root directory.
Select if you want the files in the shared directory to be writable or not.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 28 User Account
257