Installing Upnp In Windows Example - ZyXEL Communications SBG3300-N series User Manual

Use the following screen to configure the UPnP settings on your Device. Click Network Setting >
LAN > UPnP to display the screen shown next.
Figure 57 Network Setting > LAN > UPnP
The following table describes the labels in this screen.
Table 36 Network Setting > LAN > UPnP
LABEL
UPnP
UPnP NAT-T
Apply
Cancel

7.5 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
1
SBG3300-N Series User's Guide
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the web configurator's login screen without entering the Device's IP address (although you
must still enter the password to access the web configurator).
Select Enable to allow UPnP-enabled applications to automatically configure the Device so
that they can communicate through the Device by using NAT traversal. UPnP applications
automatically reserve a NAT forwarding port in order to communicate with another UPnP
enabled device; this eliminates the need to manually configure port forwarding for the UPnP
enabled application.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 7 LAN
111