The 3G Backup Screen - ZyXEL Communications VMG1312-B10B Series User Manual

Table 10 Bridge Mode (ADSL over ATM) (continued)
LABEL
Sustainable Cell
Rate
Maximum Burst
Size
QoS
Rate Limit
Apply
Cancel

6.3 The 3G Backup Screen

Use this screen to configure your 3G settings. Click Network Setting > Broadband > 3G
Backup.
VMG1312-B10B / VMG1312-B30B Series User's Guide
DESCRIPTION
The Sustainable Cell Rate (SCR) sets the average cell rate (long-term) that can be
transmitted. Type the SCR, which must be less than the PCR. Note that system default is 0
cells/sec.
This field is available only when you select Non Realtime VBR or Realtime VBR.
Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS, which is less than 65535.
This field is available only when you select Non Realtime VBR or Realtime VBR.
Enter the rate limit for the connection. This is the maximum transmission rate allowed for
traffic on this connection.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 6 Broadband
87