ZyXEL Communications SBG3300-N series User Manual page 82

Chapter 6 Wireless
Table 24 More AP: Edit (continued)
LABEL
Enhanced
Multicast
Forwarding
Guest WLAN
Access
Scenario
Max. Upstream
Bandwidth
Max.
Downstream
Bandwidth
Security Level
Security Mode
Apply
Cancel
82
DESCRIPTION
Select this check box to allow the Device to convert wireless multicast traffic into wireless
unicast traffic.
Select this to allow this SSID's wireless clients to access the Internet but not directly
connect to the LAN or the wireless clients in any of the Device's other SSIDs.
This displays when you make the SSID a guest WLAN.
Select External Guest to block the SSID's wireless clients from communicating directly
with the SSID's other wireless clients through the Device.
Select Home Guest to allow the SSID's wireless clients to communicate directly with the
SSID's other wireless clients through the Device.
Specify the maximum rate for wireless traffic going to the Device from the wireless clients in
kilobits per second (Kbps).
Specify the maximum rate for wireless traffic going from the Device to the wireless clients in
kilobits per second (Kbps).
Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the Device. After you select to use a security, additional
options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 6.2.1 on page 75
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
for more details about this field.
SBG3300-N Series User's Guide