The System Log Screen - ZyXEL Communications SBG3300-N series User Manual

Chapter 22 Log
Table 106 Syslog Severity Levels
CODE
5
6
7

22.2 The System Log Screen

Use the System Log screen to see the system logs. Click System Monitor > Log to open the
System Log screen.
Figure 134 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 107 System Monitor > Log > System Log
LABEL
Level
Category
Clear Log
Refresh
Export Log
System Log
#
Time
Facility
Level
Messages
238
SEVERITY
Notice: There is a normal but significant condition on the system.
Informational: The syslog contains an informational message.
Debug: The message is intended for debug-level purposes.
DESCRIPTION
Select a severity level from the drop-down list box. This filters search results according
to the severity level you have selected. When you select a severity, the Device searches
through all logs of that severity or higher.
Select the type of logs to display.
Click this to delete all the logs.
Click this to renew the log screen.
Click this to export the selected log(s).
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
This field displays the severity level of the logs that the device is to send to this syslog
server.
This field states the reason for the log.
SBG3300-N Series User's Guide