ZyXEL Communications SBG3300-N series User Manual page 128

Chapter 8 Routing
You can use source-based policy forwarding to direct traffic from different users through different
connections or distribute traffic among multiple paths for load sharing.
The Policy Forwarding screen let you view and configure routing policies on the Device. Click
Network Setting > Routing > Policy Forwarding to open the following screen.
Figure 64 Network Setting > Routing > Policy Forwarding
The following table describes the labels in this screen.
Table 41 Network Setting > Routing >Policy Forwarding
LABEL
Add new Policy
Forward Rule
#
Policy Name
Source IP
Source Subnet
Mask
Protocol
Source Port
WAN
Destination IP
Destination
Subnet Mask
Destination
Port
Destination
MAC
Modify
128
DESCRIPTION
Click this to create a new policy forwarding rule.
This is the index number of the entry.
This is the name of the rule.
This is the source IP address.
This is the source subnet mask address.
This is the transport layer protocol.
This is the source port number.
This is the WAN interface through which the traffic is routed.
This is the destination IP address.
This is the destination subnet mask address.
This is the destination port number.
This is the destination MAC address.
Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the Device. A window displays asking you to
confirm that you want to delete the policy.
SBG3300-N Series User's Guide