ZyXEL Communications SBG3300-N series User Manual page 193

The following table describes the fields in this screen.
Table 81 User Access Control Rule: Add/Edit
LABEL
General
Active
User Access
Control Profile
Name
Network User
Internet Access Schedule
Day
Time
Network Service
Network
Service Setting
Add new
service
#
Service Name
Protocol:Port
Modify
Blocked Site/
URL Keyword
Apply
Cancel
SBG3300-N Series User's Guide
DESCRIPTION
Select the check box to activate this User Access control rule.
Enter a descriptive name for the rule.
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user's MAC address. If you select All, the rule applies to all
LAN users.
Select check boxes for the days that you want the Device to perform User Access control.
Drag the time bar to define the time that the LAN user is allowed access.
If you select Block, the Device prohibits the users from viewing the Web sites with the URLs
listed below.
If you select Allow, the Device blocks access to all URLs except ones listed below.
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Name of the new rule.
This shows the index number of the rule. Select the check box next to the rule to activate it.
This shows the name of the rule.
This shows the protocol and the port of the rule.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Click Add to show a screen to enter the URL of web site or URL keyword to which the Device
blocks access. Click Delete to remove it.
Click this button to save your settings back to the Device.
Click Cancel to restore your previously saved settings.
Chapter 16 User Access Control
193