Technical Reference - ZyXEL Communications SBG3300-N series User Manual

Chapter 19 IPSec VPN
The following table describes the labels in this screen.
Table 94 VPN > IPSec VPN > Radius
LABEL
Radius Setup
Server Address
Authentication Port
Backup Server
Address
Backup
Authentication Port
Key
Timeout
Retries
Apply
Cancel

19.7 Technical Reference

This section provides some technical background information about the topics covered in this
chapter.
216
DESCRIPTION
Enter the address of the RADIUS server.
Specify the port number on the RADIUS server to which the Device sends
authentication requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup server, enter its address here.
Specify the port number on the RADIUS server to which the Device sends
authentication requests. Enter a number between 1 and 65535.
Enter a password (up to 15 alphanumeric characters) as the key to be shared between
the external authentication server and the Device.
The key is not sent over the network. This key must be the same on the external
authentication server and the Device.
Specify the timeout period (between 1 and 300 seconds) before the Device disconnects
from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or
the RADIUS server is down.
Specify the number of connection retries before the Device disconnects from the
RADIUS server.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previous settings.
SBG3300-N Series User's Guide